General Instructions

For best results follow these instructions:

Apply QUICK JOB after mixing according to dilution scale on the side of the bottle. (Measurements are always given as one part QUICK JOB to the larger amounts of water.) QUICK JOB will not harm painted surfaces with permanent type paints.

Boats, Trailers, and RV’s:

Mix according to dilution scale on the bottle and apply with a sprayer. Then wipe with a clean, dry cloth.

Carpets:

Spots and Stains – Apply QUICK JOB (10-1) with a soft bristle brush. After loosening soil, wipe soil and excess moisture from the surface with clean turkish toweling. – MUST RINSE WITH WATER

Shampoo – The basic dilution ratio for machine shampooing larger areas of carpeting and upholstery is 30 parts warm water to one part QUICK JOB. (You may want to mix it stronger or weaker according to your needs.) Add this mixture to the machine tank and use the machine as usual. After shampooing, be sure to remove excess moisture with toweling or vacuum. – (Do not use on wool, stain resistant carpet, or Oriental rugs.)

Engine Cleaning:

Apply QUICK JOB (5-1), let soak for 15 minutes and rinse with hot water and a pressure nozzle.

Bathroom Showers:

Fiberglass wall, tile, glass shower door (5-1) use NON-ABRASIVE DOBIE PAD. Fiberglass shower floors (5-1), let soak and then scrub with stiff nylon brush.

Ovens, Stoves, and Grills:

Bring up to warm touch. Apply QUICK JOB (5-1) moderately, heat to 110 degrees for five minutes and wipe thoroughly with a clean, damp cloth.

Rust Stains on Driveways:

Apply QUICK JOB (5-1) with a wire brush and warm water.

Do not use on:

Wallpaper, silks, wools, satins, suedes, or low grade water based paints.

DO NOT USE FULL STRENGTH ON ANYTHING